5A Molecular Sieve Supplier for Gas Separation & Purification
Adsorbent Source supplies 5A molecular sieve for industrial gas separation, purification, normal paraffin separation and selected dehydration applications. As a 5A molecular sieve supplier in China, we support grade and particle-size confirmation, samples, TDS / SDS / COA, packaging and export quotation according to your application and purchasing requirements.
For a Fast Quote, Send:
| Buyer Check | What to Confirm |
|---|---|
| Product | 5A molecular sieve, calcium-form zeolite adsorbent for gas separation, purification and selected dehydration duties. |
| Typical Uses | Gas separation, normal paraffin separation, process gas purification, hydrogen-rich gas purification and selected drying duties. |
| Form | Beads or pellets depending on supplier, adsorber design, pressure-drop limit and mechanical requirements. |
| Process Data | Feed composition, target molecule, outlet specification, temperature, pressure, flow rate and regeneration cycle. |
| Commercial Data | Required quantity, particle size, packaging, destination, existing specification and required documents. |
What Is 5A Molecular Sieve?
5A molecular sieve is a calcium-form zeolite adsorbent with an effective pore opening of approximately 5 angstroms. It can adsorb molecules smaller than its pore opening and is commonly used in gas separation, purification and selected drying applications. Buyers comparing the full product family can also review the Molecular Sieves parent page.
Compared with general drying adsorbents, 5A molecular sieve is often reviewed for applications where molecular size, adsorption selectivity and process conditions affect separation performance. It is commonly considered for gas separation, hydrocarbon separation and selected process purification systems.
The correct 5A molecular sieve grade depends on the gas or liquid stream, separation target, impurity profile, operating conditions, regeneration method and equipment design. If the grade is not yet fixed, start with our How to Select Molecular Sieve guide before comparing supplier-specific data.
5A Molecular Sieve vs 3A, 4A and 13X
Molecular sieve grade selection should be based on molecule size, adsorption target, process stream, operating conditions and regeneration method. 5A molecular sieve is commonly reviewed for separation and purification processes involving selected gas molecules and normal paraffins.
| Grade | Typical Direction |
|---|---|
| 3A Molecular Sieve | Selective water adsorption where larger molecules should be excluded from the adsorption system. |
| 4A Molecular Sieve | General gas and liquid drying, compressed air dehydration and selected industrial purification applications. |
| 5A Molecular Sieve | Gas separation, purification, normal paraffin separation and selected dehydration applications. |
| 13X Molecular Sieve | Larger-pore gas purification, CO2 removal, dehydration and air separation pretreatment. |
5A Molecular Sieve Applications
5A molecular sieve is commonly reviewed for gas separation, purification, hydrocarbon separation and selected drying applications. Application suitability should be confirmed according to feed composition, target molecule, operating data and outlet specification.
5A Molecular Sieve for Gas Separation
5A molecular sieve for gas separation is reviewed where molecular size, adsorption selectivity, pressure and cycle conditions are important.
5A Molecular Sieve for Normal Paraffin Separation
5A molecular sieve for normal paraffin separation is commonly considered for separating normal paraffins from branched or cyclic hydrocarbons under suitable process conditions.
Hydrogen Purification
Used in selected purification systems where impurities need to be adsorbed from hydrogen-rich gas streams.
Selected Gas Separation & Pretreatment
5A molecular sieve may be reviewed for selected gas separation and pretreatment duties where molecular size and adsorption selectivity are relevant. For PSA oxygen or PSA nitrogen generation, the adsorbent grade should be selected according to the specific process and required gas purity. See PSA Oxygen Generation Adsorbents and PSA Nitrogen Generation Adsorbents.
Process Gas Purification
Applied in gas purification units where moisture, selected impurities or target molecules need to be removed before downstream processing.
Industrial Dehydration
5A may also be reviewed for selected natural gas dehydration and process-gas drying duties when the stream composition and adsorption target match the material properties.
How to Select 5A Molecular Sieve
For accurate 5A molecular sieve selection, provide both the separation objective and the operating conditions. This helps avoid mismatches between grade name, particle form and actual adsorption performance.
Feed Composition
Gas or liquid composition, impurity profile and target molecules.
Separation Objective
Target molecule, impurity to be removed and required outlet specification.
Operating Conditions
Temperature, pressure, flow rate and adsorption cycle conditions.
Regeneration Method
Thermal regeneration, purge gas, pressure swing or other operating method.
Particle Form
Bead or pellet preference, particle size and pressure-drop requirement.
Adsorber Design
Vessel dimensions, bed depth, filling quantity and flow distribution.
Replacement Background
Existing adsorbent grade, current issue and replacement reason.
Document Needs
TDS, SDS, COA, packing information and destination country.
5A Molecular Sieve Beads, Pellets and Particle Size
5A molecular sieve may be supplied in bead or pellet form depending on product source and application requirement. Particle size should be reviewed with separation performance, pressure drop, bed design, regeneration behavior and handling conditions.
- Bead grades for selected adsorption and purification systems
- Pellet grades for applications requiring specific bed behavior
- Particle size confirmed according to adsorber and process data
- Packaging options coordinated according to shipment and storage needs
5A Molecular Sieve Supplier Support
Adsorbent Source supports grade and particle-size confirmation, samples, TDS / SDS / COA, packaging confirmation, export quotation and shipment preparation according to the selected 5A molecular sieve product source.
| Item | Common Options |
|---|---|
| Product Type | 5A Molecular Sieve |
| Form | Beads or pellets, depending on grade and manufacturer availability |
| Typical Size | Confirm according to application, pressure drop and bed design |
| Main Use | Gas separation, purification, normal paraffin separation and selected drying applications |
| Packaging | Bags, drums, cartons or palletized export packaging depending on quantity and shipment requirement. For export packing and container planning, review the Adsorbent Packaging and Export Guide. |
| Documents | TDS, SDS, COA, packing information and export documents can be coordinated before shipment |
5A Molecular Sieve for Gas Separation and Purification Systems
5A molecular sieve is commonly reviewed for adsorption systems where molecular size and selective adsorption behavior affect separation performance. In gas separation and hydrocarbon separation projects, final material selection should be confirmed with feed composition, target product specification, operating pressure, regeneration cycle and equipment design.
Feed Composition Review
Review gas or liquid composition before selecting the adsorbent grade.
Separation Target
Confirm the target molecule, impurity and outlet specification.
Pressure Drop Check
Match particle size with vessel design, flow rate and pressure-drop limit.
Cycle Condition Review
Review regeneration method, cycle time and operating stability.
Request a 5A Molecular Sieve Quote
Already know the grade and quantity? Send those first. Full process data is mainly required when you need product selection support. Share the gas or liquid to be treated, separation target, impurity level, outlet specification, operating conditions, particle form and required quantity. Adsorbent Source will help review suitable 5A molecular sieve supply options and documentation needs.
Request Quote or SampleRecommended Information for RFQ
- Application
- Gas or liquid to be treated
- Separation target
- Impurity or molecule to be removed
- Target outlet specification
- Operating temperature
- Operating pressure
- Flow rate
- Required form: bead or pellet
- Particle size
- Existing grade if replacing
- Filling quantity
- Estimated quantity
- Destination country
- Required documents
5A Molecular Sieve FAQ
Why is 5A molecular sieve used for separation applications?
5A molecular sieve has an effective pore opening of approximately 5 angstroms, so molecular size and adsorption selectivity can be used in selected separation and purification processes. Final suitability still depends on feed composition, temperature, pressure and cycle conditions.
What is 5A molecular sieve used for?
5A molecular sieve is commonly used for gas separation, purification, normal paraffin separation and selected industrial drying applications.
What is the difference between 4A and 5A molecular sieve?
4A molecular sieve is widely used for general gas and liquid drying. 5A molecular sieve has a larger effective pore opening and is more commonly reviewed for gas separation, purification and normal paraffin separation.
Can 5A molecular sieve be used for gas separation?
Yes. 5A molecular sieve is commonly reviewed for gas separation processes where molecular size, adsorption selectivity, operating pressure and regeneration cycle affect performance.
Is 5A molecular sieve used for normal paraffin separation?
Yes. 5A molecular sieve is commonly considered for normal paraffin separation under suitable hydrocarbon composition, operating temperature, pressure and process design.
Can 5A molecular sieve be used for drying?
5A molecular sieve can adsorb water and may be used for selected drying applications. However, grade selection should also consider molecule size, process stream compatibility and the main adsorption target.
Is 5A available as beads and pellets?
5A molecular sieve may be supplied as beads or pellets depending on grade and manufacturer availability. Particle form should be selected according to equipment design, pressure drop and handling requirements.
How do I choose the particle size?
Particle size depends on flow rate, vessel size, bed depth, pressure drop limit, regeneration behavior and handling requirements. Existing equipment specifications are useful for replacement projects.
What information should I send for a 5A molecular sieve quote?
Send the application, feed composition, separation target, impurity or molecule to be removed, required outlet specification, temperature, pressure, flow rate, regeneration method, particle size, filling quantity, order quantity, destination and required documents.
What documents can Adsorbent Source provide?
Adsorbent Source can help coordinate TDS, SDS, COA, packing information and export documents according to the selected product source and order requirements.